Инструкция по эксплуатации Panasonic EH-HS60
Страница 4
English
Partsidentification
2
1
0·LOCK
2
1
0·LOCK
Shaded areas represent heated sections. To avoid burns, do not
touch these parts when the hair straightener is turned on.
A
Switch
B
Grip
C
Press plate
D
Iron plate (inside of the press
plate)
E
Steam outlet
F
Negative ion nozzles
G
Lamp
H
Iron plate (inside of the main
body)
I
Tank
J
Buttons
K
Tank block
a
Felt
b
Cap
c
Plug
Switch
Ironplate
D
Ironplate
H
Negativeions
Heats up
Heats up
Released
1
Heats up
-
Released
0·LOCK
The power turns off and the iron plate closes.
•
Fillingthetankwithwater
1
1
Pullthetankstraightoutinaslightlyupward
direction,whilepressingbuttonsonbothsides
ofthetank.
2
2
Opentheplugofthetankand
soakthefeltpartinsideofthe
cap(about5-6seconds).
The hair straightener may have difficulty
releasing steam if the felt is dry. In this
case, thoroughly soak the felt
(approximately 10 minutes) before use.
•
3
3
Fillthetankwithwater,andthensecurely
attachtheplug.
Use only tap water. (Use of other types of water may damage the
hair straightener.)
Be sure not to let dirt get between the plug and tank. (Dirt may
cause water leakage.) Wipe off excess water before attaching
the tank. (Excess water may cause hot water droplets to be
generated.)
4
4
Alignthetankwiththeendofthehair
straightenerandattachitfromabove.
5
5
Pushthetankinuntilaclickisheard.
Notes
Note that the surface of the hair straightener becomes hot if
used without water.
The hair straightener can be used for approximately 10 minutes
on a full tank of water.
Before attaching the tank to the hair straightener, be sure to
shake the hair straightener - times with the open (tank) end
facing down to drain out any water. Hot water droplets may be
discharged if water remains in the hair straightener.
•
•
•
•
•