Panasonic -ME14CD3P - Инструкция (Страница 12)

12
Helpful Information
■ When the remote control is not available and the batteries are out.
It is still possible for emergency operations. In this case, the unit will operate on the default temperature of 25°C.
Adjustment to the default temperature is not allowed.
Auto operation
button
1
Switch on the power supply
2
Press the auto operation button.
■ To stop operation, press the button once more.
Helpful Information
Cassette Type Duct Type
AUTO
OFF/ON
POWER TIMER
ODOUR
WASH
AUTO
OFF/ON
Auto operation button
■ Placing things around the indoor unit:
Allow a lot of spacing if you wish to place things around the indoor unit.
If tall furniture are placed near the unit, it may hinder the air flow which will reduce the efficiency of the unit.
■ When the unit is not operated for an extended period of time:
■ When there is a power failure
● During operation:
All operations stopped. When power supply is restored, run operations all over again.
● During preset timer mode:
The timer mode is cancelled. (The indoor unit TIMER lamp will be off) When power supply is restored, reset TIMER
once again.
■ When there is thunder in the vicinity:
To avoid lightning strikes, stop all operations and switch off the power supply. (To protect the air conditioner)
■ After you have used wax:
Be sure the furniture wax is fully dried before starting the air conditioner.
Operate the AIR CIRCULATION
mode for 2 to 3 hours
(To dry the interior sections of the
indoor unit)
Stop the operations
and switch off the
power supply. Remove all batteries from the
remote control.
(To prevent electrolyte leakage)