Vitek VT-1201 - Инструкция (Страница 3)

IMPORTANT SAFEGUARDS
l Read all instructions before use.
l Ensure the voltage on the Rating Label is the same as that in your
home.
l Use the iron only for its intended use.
l The iron should always be turned to off before plugging or unplugging
from the wall socket/ Never yank the cord to disconnect from the wall
socket; instead. Grasp plug and pull to disconnect.
l Do not operate iron with a damaged cord/plug or if the iron has been
dropped or damaged. To avoid the risk of electric shock, do not disas
semble the iron, take it to a qualified serviceman for examination and
repair. Incorrect reassemble can cause a risk of electric shock when
the iron is used.
l Take care: If you are leaving the appliance momentarily, always switch
it off, remove the plug from the socket and stand the iron on its base.
l Close supervision is necessary for any appliance being used by or near
children. Do not leave the iron unattended while connected or on an
ironing board.
l To protect against a risk of electric shock, do not immerse the iron in
water or other liquids.
l Burns can be occur from touching hot metal parts, hot water or steam.
Use caution when you turn a steam iron upside down there may be hot
water in the reservoir.
l Do not allow cord to touch hot surfaces. Let the iron cool completely
before putting away, loop cord loosely around the iron when storing.
l Always disconnect the iron from the electrical socket when filling with
water or emptying and when not in use.
l To avoid a circuit overload, do not operate another high wattage appli
ance on the same circuit.
l If an extension cord is absolutely necessary, a 10 ampere (Europe)/15
ampere (America) should be used. Cords rated for less amperage may
overheat. Care should be taken to arrange the cord so that it cannot be
pulled or tripped over.
l Prevent water over flow, do not fill water over max level.
l Save these instructions.
ENGLISH
3 18
1201.qxd 04.02.03 17:51 Page 6