Vitek VT-3787 - Инструкция (Страница 4)

POWER SUPPLY
Power Supply from the Adapter
1. Insert the power adapter plug into the power adapter jack (9)
2. Connect the adapter to the power supply.
Note:
• When the player is working from batteries and the adapter becomes
connected, the power supply will automatically be switched to the
adapter.
• Use only the adapter included with the player. Other models of power
adapters can damage the player.
• Before connecting make sure that the adapter operating voltage
corresponds to the voltage of the local power supply.
• When not using the player, disconnect the adapter from the power
supply.
• Do not touch the adapter with wet hands.
Supply from Batteries
1. Disconnect the network adapter from the power supply outlet.
2. Open the battery compartment (18).
3. Insert two Ni-MH batteries (1.2V 1200ìÀ, rectangular type), observing
their polarity.
4. Close the battery compartment (18).
Charging the Batteries
1. Connect the network adapter to the power supply outlet.
2. Put the charging switch (15) to the "ON" position to start charging. The
red charging indicator (16) will light up, showing the beginning of
charging process.
3. After 15 hours disconnect the power adapter from the power supply .
ENGLISH
3
Vt-3787.qxd 20.12.2004 17:17 Page 3