Vitek VT-3787 - Инструкция (Страница 11)

2. By pressing buttons SKIP/ SEARCH FW / TUNING UP (3) or
SKIP/SEARCH BW / TUNING DOWN (4) select the desired album.
3. After selecting the album, press PLAYBACK / PAUSE button (6) to start
playback.
RADIO
Normal setting
1. Press "FM" button to enter the FM radio mode.
2. Tune to the radio station using the buttons SKIP/ SEARCH FW / TUNING
UP (3) or SKIP/SEARCH BW / TUNING DOWN (4). When keeping these
buttons in the pressed position for more than 2 seconds, the automatic
search function starts.
3. To turn off the radio, press STOP button (5).
Programming radio stations
You can store up to 10 FM stations in the memory.
1. Using the buttons SKIP/ SEARCH FW / TUNING UP (3) or SKIP/SEARCH
BW / TUNING DOWN (4), find the needed radio station.
2. Press the MODE button (2), on the LED-display and the message "PROG"
and the memory cell number will appear.
3. Press ESP button (14) to select a memory cell number where you wish to
store the radio station.
4. Press MODE button (2) to store the radio station in the memory.
Selecting a Station Stored in Memory
Press the ESP button (14) to select the desired station.
Note: Unfold the headphones cord since it performs the function of FM aeri-
al.
Stereo / Mono Receiving Modes
The function works only in FM mode. Press ESP button (14), if a strong noise
is present when listening to FM station. If the reception is conducted in the
Stereo mode, pressing ESP button (14) will switch to the Mono mode. Press
ESP button (14) once again to return to the initial mode.
Dynamic Bass Boost
To amplify the sound of low frequencies, set the BASS BOOST switch (13)
into "ON" position.
Note: When listening at a high volume level with Bass Boost activated, the
distortion of sound can be heard. After reducing the volume level, the sound
quality will improve.
ENGLISH
10
Vt-3787.qxd 20.12.2004 17:17 Page 10