Sony CCD-TRV108E - Инструкция (Страница 143)

143
Customising Your Camcorder
Выполнение индивидуальных установок на видеокамере
In more than 5 minutes after removing the power source
The AUDIO MIX*
2) , COMMANDER* 1) and HiFi SOUND* 2) items are returned to their default
settings.
The other menu items are held in memory even when the battery is removed.
Recording a close-up picture
When REC LAMP is set to ON, the red recording lamp on the front of the camcorder may reflect
on the subject if it is close. In this case, we recommend you setting REC LAMP to OFF.
* 1) CCD-TRV107E/TRV208E/TRV408E, DCR-TRV140E only
* 2) DCR-TRV140E only
Icon/item
WORLD TIME
BEEP
COMMANDER* 1)
DISPLAY
REC LAMP
VIDEO EDIT* 2)
POWER
switch
CAMERA
PLAYER
CAMERA
PLAYER
CAMERA
PLAYER
CAMERA
CAMERA
PLAYER
Mode
——
z MELODY
NORMAL
OFF
z ON
OFF
z LCD
V-OUT/LCD
z ON
OFF
——
Meaning
To set the clock to the local time.
Turn the SEL/PUSH EXEC dial to set the time
difference. The clock changes by the time
difference you have set. If you set the time
difference to 0, the clock returns to the originally
set time.
To output the melody when you start/stop
recording or when an unusual condition occurs
on your camcorder.
To output the beep instead of the melody.
To cancel the melody and beep sound.
To activate the Remote Commander supplied
with your camcorder.
To deactivate the Remote Commander to avoid
unintentional operations caused by other VCR’s
remote control.
To show the display on the LCD screen and in the
viewfinder.
To show the display on the TV screen, LCD
screen, and in the viewfinder.
To light up the recording lamp at the front of your
camcorder when recording.
To turn the recording lamp off so that the subject
is not aware of the recording.
To make programmes and perform video editing.
(p. 111)
Changing the menu settings