Electrolux EU 6221 U - Инструкция (Страница 12)

Fasten the appliance to the worktop or the sides,
applying the sealing strip between the appliance and
adjacent cabinet using the fixing brackets (E).
The appliance is equipped with adjustable support
feet. To adapt the appliance to the height of the
installation area (max 870 mm), screw in, or screw
out the feet situated in the four bottom corners.
Separate parts A, B, C, D as shown in the figure.
12
D319
E
E
SUPER. INFER.
UPPER LOWER
S.I.006
30
PR266
A B
C
D
20mm
A
50mm
PR166
Place guide (A) on the inside part of the furniture
door, in the upper and lower positions as shown in the
figure and mark the position of external holes. Having
drilled the holes, fix the guide with the screws
supplied.
Fix cover (C) on guide (A) until it clips into place.
Open the appliance door and the furniture door at
90°. Insert the small square (B) into guide (A). Put
together the appliance door and the furniture door
and mark the holes as indicated in the figure.
Remove the squares and drill holes with Ø 2 mm at 8
mm from the outer edge of the door. Place the small
square on the guide again and fix it with the screws
supplied.
P R 3 3 / 2
C
A
8mm
PR167
A
B