ViTESSE VS-117 - Инструкция (Страница 5)

P/8
Name and Operations of the Parts
Rid Chlorine = Removes Chlorine
Electric water output = Electric Water output button
Heat = Heat indicator
Overheating alarm = over-heat temperature alarm indicator
Keep Warm = Keep warm indicator
Power = Power indicator
Automatic = Automatic Cold switch button
Operation Description for VS-117
Method for Using the Air-Pot
1. Remove the Lid cover, fill water into the container.
Ø Please fill the water - do not wet the pot.
Ø Fill the water till the FULL mark mentioned in the air-pot, water will
automatically flow out from the dispenser if it exceeds the full mark.
Ø Please close the lid cover after filling the water.
Ø Note: - Please immediately
fill the water if the water
dispense level is lower than
the water supply mark;
otherwise, it may cause dry-
boiling.
Ø For re-boiling - please press
the re-boiling button and the
heat indicator light will be
on.
Ø Time for re-boiling is about
2 - 3 m i n u t e s . ( r o o m
temperature: 20°C)
2. Boiling Keep Warm Function
1. Connect the power cord with the power socket.
Ø
After connecting, the power indicator light will be on (RED) and heat
indicator light will be on (red), then the pot starts to boil the water.
Ø After the water is boiled, the pot automatically switches on to “KEEP
WARM” state, heat indicator light will be off and keep warm indicator light
will be on.
During keep warm course, if the temperature drops and if it is lower than the set
temperature, the pot will automatically heat the water to the set temperatures.
3. After Use
Ø Unplug the power plug from power socket.
Ø Remove the plug from the pot.
Ø Remove the lid cover
Ø Drain out remaining water from the water drainage mark; do not let any
water remain in the internal tank.
P/7
Refill