ASSISTANT AH-1522 - Инструкция (Страница 2)

– 9 – – 10 – – 11 – – 12 –
– 13 – – 15 –
ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH
ENGLISH ENGLISH ENGLISH ENGLISH – 14 – ENGLISH ENGLISH – 16 – ENGLISH ENGLISH
Warranty period Гарантийный срок
Date of sale Дата продажи
Model Номер модели
Stamp Печать магазина
TO USE THE SNOOZE ALARM
When alarm sounds, press the [SNOOZE/DIMMER]
once, the alarm will be silenced and come on again ac-
cording to the set snooze duration.
TO USE THE PROJECTION CLOCK
Press [PROJECTION] button to turn on or off the projec-
tion clock. Turn the focus knob on the projector to adjust
the image of the projected time onto the wall or ceiling.
Press and hold the [PROJECTION] button for 2 seconds
to flip the projected time 180 degree.
TO USE THE HI-LO DIMMER
This clock radio features an adjustable display backlight
with dim, medium and bright settings. To select a backlight
setting, press the [SNOOZE/DIMMER] button until the
brightness is reached. This setting can only be selected
when the radio is not playing.
Note: Please note the always-on backlight will not work while
the clock is operating on battery power.
TO SET UP THE FM ANTENNA
Extend the FM wire antenna fully and vary the direc-
tion for best FM reception. Do not strip, alter or attach to
other antennas.
TO TUNE AND PLAY THE RADIO
1. Press [SLEEP/RADIO], the clock display will show
“ON” and flashes.
2. Then press [ ] or [ ] to tune into a desired radio
station. To scan the stations, press [ ] or [ ]
for a few seconds and release. The radio will search
and stop on the next strong station.
Remark: keep your
radio away from fluorescent lamps, which may cause interfer-
ence to the radio.
3. You may also use the MEMORY function to select a
preset radio station. See the TO USE THE MEMORY
SET FUNCTION.
4. Rotate the VOLUME dial to adjust the volume level.
5. Press [SNOOZE/DIMMER] button to turn off the radio.
TO USE THE MEMORY SET
(RADIO PRESET) FUNCTION
This clock radio features a total of 5 preset memory of
FM radio .These allow you to preset your favorite stations
and access them quickly.
1. Turn on the radio by press of [RADIO / SLEEP]. Press
[ ] or [ ] to select a radio station you like to
preset memory.
2. Then press and hold the MEMORY until “MEM” ap-
pears and “01” flashes below the time digits.
3. Then press [MEMORY] again to store Memory 01.
4. Press [
] or [ ] to select another station you like
to preset . Then press and hold [MEMORY] until “MEM”
appears and “01” flashes below the time digits. Press
[+] or [–] button to select “02” on the lower display,
then press [MEMORY] again to store.
5. Repeat Step 4 to preset up to five FM stations.
6. To listen to a preset station at any time, simply press
the [MEMORY] to select a preset station while the
radio is on.
7. To edit a preset station, select another station and
then repeat Step 2-4. This overrides the original setting.
TO USE THE SLEEP TIMER
1. Press the [RADIO/SLEEP] button twice to enter the
sleep mode. The clock display shows the SLEEP icon
and “5” (5 minutes) and flashes, keep pressing the
[RADIO/SLEEP] to select a 10-,15-, 30-, 45-, 60-,
75-, 90-minute sleep timer. The sleep timer display
remains for few seconds and then returns to normal
clock display. The SLEEP icon will appear, showing
the radio timer is activated.
2. The radio will play for the programmed sleep time and
then shut off. To check how many sleep time is remain-
ing, press [RADIO/SLEEP] button once.
3. To turn off the radio before the sleep time has elapsed,
press [SNOOZE/DIMMER] once.
TROUBLE SHOOTING
If your clock displays irrelevant time or does not function
properly, which maybe caused by electro-static discharge
or other interference, use a thin object to press the
[RESET] button on top. The clock radio will be reset to
default settings and you need to set it again.
CARE OF YOUR PRODUCT
1. Place your clock radio on a stable surface, away from
sources of direct sunlight or excessive heat or moisture.
2. Protect your furniture when placing your units on a
natural wood and lacquered finish by using a cloth or
protective material between it and the furniture.
3. Clean your unit with a soft cloth moistened only with
mild soap and water. Stronger agents such as benzine,
thinner or similar materials can damage the surface
of the unit. Make sure the unit is unplugged before
cleaning.
4. Do not mix old and new batteries. Do not mix alkaline,
standard (carbon-zinc), or rechargeable (nickel-
cadimium) batteries.
5. If the unit is not to be used for a prolonged period, such
as a month or longer, remove the batteries to prevent
possible corrosion. Should the battery compartment
become corroded or dirty, clean the compartment
thoroughly and replace the batteries.