Инструкция по эксплуатации ASSISTANT AH-1522

Projection alarm clock with radio

Advertising

O W N E R ’ S M A N U A L

PROJECTION ALARM CLOCK

WITH RADIO

Model AH-1522

– 1 –

– 2 –

– 3 –

– 4 –

– 5 –

– 7 –

ENGLISH

– 6 –

ENGLISH

– 8 –

ENGLISH

INSTALLATION

Plug the AC/DC adaptor to any household AC outlet,

then plug the DC jack to the back of the clock radio. Your
clock radio is ready to work for you.

BATTERY BACK-UP INSTALLATION

In the event that the AC/DC adaptor power is discon-

nected or a power failure or other interruptions occur,
the back-up batteries will maintain the time and alarm
settings.

Wake-by-Buzzer still functions by battery back-up. The

radio, projection clock, LCD backlight and the Wake-by-
Radio will resume to work when AC power is restored.
1. Remove the battery cover at the bottom of the clock

radio.

2. Insert 3 x AAA batteries (alkaline batteries preferred)

by observing the + and–polarity signs inside the bat-
tery compartment.

3. Replace the battery cover, making sure the cover

locks into place.

Note: for best reception, release and extend the FM wire
antenna. Do not strip, alter or attach to other antennas.

LCD VIEWING ANGLE

This clock radio is designed for bedside use.
The effective viewing angle of the LCD display is de-

scribed in the attached drawing.

TO SET TIME

1. Press [SET] to enter time set mode, the time digits

flash.

2. Press [+] or [-] on the top of your clock radio to set

your desired time. Press and hold [-]/[+] will accelerate
setting in faster speed.

TO SET 12HR OR 24 HR TIME FORMAT

1. Then press [SET] again, the clock display shows 24Hr

and flashes.

2. Press [+] or [-] to select 12Hr or 24Hr. When 12Hr time

format is selected, the PM icon will appear on the clock
display to indicate the afternoon time.

TO SET THE SNOOZE DURATION

1. Press [SET] again, the clock display shows Zz and

05 flashes.

2. Press [+] or [-] to set your desired snooze duration

from 5 to 60 minutes.

3. Press [SET] again (or if no key is pressed within 5

seconds) to return to normal clock display mode.

TO SET THE ALARMS

1. To set Alarm 1, press [ALM 1] button once, the clock

display shows 1 and 6:00 flashes.

2. Press [+] or [-] to set your desired alarm time. Press

and hold [+] or [-] will accelerate setting in faster speed.

3. Press [ALM 1] again to select Wake-by-Buzzer

(

icon appears) or Wake-By-Radio

4. (

icon appears)

5. To set Alarm 2, just repeat Step 1–3 above but use

[ALM 2] button.

TO TURN ON OR OFF ALARM 1

AND/OR ALARM 2

1. Press [ALM 1] or [ALM 2] button once to review the

currently set alarm time(s).

2. Press the button again to turn on or turn off the alarm.

When the alarm is turned on, the related alarm icon
appears. When no alarm icon is showing, the related
alarm icon is off and the alarm function is turned off.

TO STOP AND RESET THE ALARM

TO COME ON THE NEXT DAY

When Alarm 1 sounds, press the [ALM 1] button to stop

the alarm sound and automatically reset it to come on the
following day. Similarly, stop the alarm by pressing [ALM 2]
button when Alarm 2 sounds.

SNOOZE ICON

PRESENT RADIO MEMORY

WAKE BY BUZZER (ALARM 2)

FM RADIO BAND ICON

MEMORY

SLEEP TIMER

TIME

PM INDICATOR

WAKE BY BUZZER (ALARM 1)

RESET

SET

PROJECTION

ALARM 1 ALARM 2 SNOOZE/DIMMER – +

RADIO/SLEEP

PRESENT READIO
MEMORY

BACKWARD

FORWARD

FOCUS KNOB

VOLUME TUNNER

AUX LINE-IN

INSERT
3 x AAA BATTERIES INSIDE THE BATTERY
COMPARTMENT

INSERT AC/DC ADAPTOR JACK

PROJECTOR

AC/DC ADAPTOR

EFFECTIVE
VIEWING ANGLE

Advertising