Binatone CVC-7120 Newton - Инструкция (Страница 7)

7
ENGLISH
«ON/OFF» (9) once again to switch off the vacuum cleaner.
4. For a prompt changing of the vacuum cleaner power, you can
use the air flow power selector (6), installed at the flexible
hose handle (4).
5. Press the automatic hose coiling button to wind up the power
cord (10). Hold the power cord by hand to prevent the power
cord damage when it’s coiled up quickly.
Protective device of motor (for models CVC-
7190, CVC-7120, CVC-7100)
There is a temperature controller designed in the body of
cleaner motor, which can automatically cut off the power supply
of motor to prevent overheating or damage.
If the temperature controller is cut off,
1. Stop the cleaner immediately, pull out the power plug.
2. Make the cleaner cool for 30 minutes.
3. Check and remove the hair roll or other roll-like rubbish block-
ing the air inlet, clean the dust container and replace the filters
when necessary.
4. Put the mains plug in the socket.
5. Turn the appliance on with the «ON/OFF» button.
Your vacuum cleaner advantages
Your vacuum cleaner is furnished with the highly-efficient HEPA
(High Efficiency Particle Absorption) H10 filter. These filters
ensure the utmost thorough and hygienic cleaning of premises.
Attention: Do not use the vacuum cleaner without the
filters installed, otherwise the suction power could
drop and the motor could be damaged. Timely clean
filters to extend the vacuum cleaner service life (ref. to
«Cleaning and Maintenance»
sections).
CLEANING
AND MAINTENANCE
X Always turn off the appliance and pull the
plug of the cord from the electric wall outlet
before cleaning.
X Wipe the appliance body (1) with a damp
lint free cloth. Do not use the appliance till it
becomes completely dry. Do not use alco-
hol, gasoline or any other similar substance
for cleaning the appliance. Also abrasive cleaning materials
should not be used.
X When the appliance is not in use any longer, wait until it
completely cools down, and then, by pressing the automatic
power cord rewind button (10), wind up the power cord.
X You may store the appliance either in horizontal position. You
may also fix the hose by inserting the boss of the multipurpose
nozzle (20) into a special hold-groove at the appliance casing.