Vitek VT-3535 - Инструкция (Страница 5)

SETTING UP
• Set up the transmitter(s) before setting up
the receiver
1. Remove battery cover and insert batteries
to start setup 2 AA size batteries (included)
Insert batteries into compartment observing proper
polarity
2. HOUSE CODE will flash for 8 seconds
3. Select HOUSE CODE (1-15) by pressing
C/F and pressing SET to CHANNEL setting
If you have multiple transmitters for a single receiver, set each trans-
mitter to the same House code
4. CHANNEL will flash for 8 seconds
5. Select CHANNEL (1-3) by pressing C/F
If you have multiple transmitters for a single receiver, set each trans-
mitter to a different Channel code
6. Humidity & Temperature will alternatively display on LCD screen
7. Select °C or °F of Temperature by pressing C/F
• Use a different house code if your weather station detects other signals
from neighboring sources
• Factory default: house code = 01 and chan-
nel = 01
1. Remove battery cover
2. 2 AA size batteries (included)
3. Insert batteries into compartment, observing
proper polarity; replace cover
REPLACING BATTERIES: symbol on receiver will appear when batteries
need to be changed.
Transmitter: Lo bat will be displayed
ENGLISH
4
Setting up transmitter(s)
Setting up receiver
3535.qxd 31.08.2004 10:01 Page 4