Vitek VT-6601 - Инструкция (Страница 6)

ENGLISH
6
button. To increase the time by 1
hour, press the HOUR button by
pressing and holding the SLEEP
button. In the present time the ra-
dio will switch off.
If you want to switch off the radio
before the preset time, press the
SNOOZE button.
Note: Auto switching off of
the radio is impossible while
setting of the AUTO/OFF/ON
switch to the ON position.
Auto switching off of the radio
and waking up to radio
1. Set the alarm time as described
in the “Setting the Alarm on
time” chapter and set the
AUTO/OFF/ON switch to the
AUTO position.
2. Set the radio off time as de-
scribed in the “Auto switching
off of the radio” chapter.
3. The radio will switch off at the
preset time and will switch on
the next day at the preset time.
Note: Electromagnetic inter-
ferences can influence opera-
tion of the unit. In this case dis-
connect the unit from the pow-
er sources, and then connect
again. If necessary change the
location of the unit.
Clean and care
Before cleaning unplug the unit.
Use a soft cloth to clean the unit.
Do not use liquid or aerosol sub-
stances for cleaning.
Specifications
Power supply: 240V AC, 50 Hz DC 9V
Power consumption: Мах 3,5 W
Accuracy movement: 3 sec/day
Frequency range: AM: 535 – 1605
kHz; FM: 64 – 108 MHz
The manufacturer reserves the
right to make changes to the
characteristics of the device with-
out prior notice.
The service life of the device is
no less than 3 years.
Guarantee
Details regarding guarantee con-
ditions can be obtained from the
dealer from whom the appliance
was purchased. The bill of sale or
receipt must be produced when
making any claim under the terms
of this guarantee.
This product conforms to
the EMC-Requirements as
laid down by the Council
Directive 89/336/EEC
and to the Low Voltage
Regulation (73/23 EEC)
6601_IM.indd 6 _IM.indd 6 18.03.2009 12:33:46 18.03.2009 12:33:46