Vitek VT-6601 - Инструкция (Страница 4)

ENGLISH
4
• For additional protection during
lighting and in cases when you
are not going to use the unit for
a long time, unplug the unit. It
will prevent the unit from failure
during lighting and power surg-
es.
• To unplug the unit, hold it by the
plug. Do not pull by the cord.
• In order to avoid electric shock
do not remove the cover your-
self. Do not repair and do
not modify the unit. Technical
maintenance must be per-
formed only by qualified serv-
ice personnel.
• Install the unit in places with
proper ventilation. Do not
block the ventilation open-
ings of the unit.
• Do not connect the FM-anten-
na with the external antenna.
• The product should be situated
away from heat sources such
as radiators, heat registers,
stoves, or other products that
produce heat. Do not expose
the unit to direct sunlight, ex-
cessive dust or mechanical
shocks. Do not place the unit
near sources of open fire, such
as candles.
DESCRIPTION
1 – The AL. OFF button
2 – The TIME setting button
3 – The ALARM on button
4 – The SNOOZE button
5 – The HOUR setting button
6 – The MIN setting button
7 – The SLEEP button
8 – The VOLUME control/ BUZZ
button
9 – The TUNING knob
10 – Display
11 – The AUTO indication
12 – Battery compartment
13 – The AUTO/ON/OFF switch
14 – The FM/АМ switch
15 – The FM-antenna cord
OPEARTING INSTRUCTIONS
Inserting batteries
• Open the battery compartment
lid and insert a 9 V battery, fol-
lowing the polarity.
• Close the battery compartment
lid.
Note:
The unit is intended for opera-
tion from the mains, battery
operation is a reserve variant.
Batteries help to store the set-
tings while switching off, or
absence of power.
Remove the battery if you are
not going to use the unit for a
long time.
Before connecting the unit,
make sure, that the electricity
6601_IM.indd 4 _IM.indd 4 18.03.2009 12:33:46 18.03.2009 12:33:46