Troubleshooting, 63 references english – Инструкция по эксплуатации JVC KW-AVX820

Страница 63

Advertising
background image

63

REFERENCES

ENGLISH

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service center.
• For operations with the external components, refer also to the instructions supplied with the adapters used for the

connections (as well as the instructions supplied with the external components).

• Messages (enclosed in “ ”) in the tables below are shown in the language selected on <Language>. (

15)

Messages described here are in the language of this manual.

Symptom

Remedy/Cause

General

• No sound comes out of the speakers. • Adjust the volume to the optimum level.

• Check the cords and connections.
• DTS sound cannot be reproduced through any terminals

(Speaker out/LINE OUT/DIGITAL OUT).

• The screen is not clear and legible.

Sunshine from the windshield may cause this symptom.
Adjust <Bright>. (

14)

• “Position Error Push Open Key”

appears on the screen.

The monitor panel angle has been forcibly adjusted, or its
adjustment has been interrupted while opening or closing.
Press

, then [Open].

• “Mecha Error Push Reset” appears on

the screen, and the panel does not
move.

Reset the unit. (

3)

• “No Signal” appears.

• Change the source.
• Start the playback on the external component connected to

VIDEO IN plug.

• Check the cords and connections.
• Signal input is too weak.

• The buttons on the monitor panel do

not work.

When the monitor panel is open, only VOL +/– and

work. The other buttons do not function.

• The unit does not work at all.

Reset the unit. (

3)

• The remote controller does not work. Deactivate Dual Zone. (

40)

(While Dual Zone is activated, the remote controller only
functions for operating the DVD/CD player.)

• The touch panel does not respond

properly.

• <Illumination> function does not

work properly.

• Keep your hands and the touch panel clean and dry.
• Eliminate static electricity and do not place magnetic items

near the unit.

• Leave the unit until the temperature becomes stable in the car.
• A rubber mat on the floor may cause this symptom. In this

case, do not use the rubber mat.

Continued on the next page

EN_KW-AVX820[EE].indb 63

EN_KW-AVX820[EE].indb 63

09.1.19 6:52:36 PM

09.1.19 6:52:36 PM

Advertising