DEFENDER Game Racer Wireless G2 - Инструкция (Страница 8)

8
Trouble shootings:
g) The controller doesn’t work normally after installing the software and hardware?
i. Check whether the controller’s link cable is strongly connected to PC/whether the controller
connected well with computer.
ii. Please check and confirm that the “Game Port Controller” of the “Game Controller” in the
“Control Panel” is “Confirmation”, and “Controller ID” of “Game Port Steering Wheel
Controller” shows “1”.;
iii. Make sure the controller’s I/O setting has no conflict with other peripheral settings.
iv. Restart the computer if it still doesn’t work normally.
h) The driving program “ PC TWIN SHOCK ” can’t be installed
，
or the test of controller has no
response after installing it
DirectX’s version is too low. It requires a version of 7.0 and up
i) There is no vibration from motor while playing racing games
Exit the game and reenter. If it still cannot work normally, restart your PC.
j) Some analog axis can go into effect automatically after you enter the games (e.g. Need for
Speed game).
The steering wheel hasn’t been calibrated or hasn’t been confirmed after calibrations.
Enter Option — Controllers — Dead Zone to adjust the range of the dead zone, and make sure
the axis in the range of the dead zone.
Effect Zone Dead Zone Effect Zone
Axis
Axis
k) Right motor vibrating constantly after entering game
Enter “Force Feedback”, turn off or turn down the engine.
Engine
l) Motor vibrate weakly after entering game
Enter Force Feedback , adjust the intensity of“STICK VOLUME
、
“ROAD EFFECTS” etc.
，
to be stronger.
g) It is difficult to calibrate in the testing platform.
Click “Default” first, and then click “Set”
h) The motor has no vibration on the testing platform.
DirectX’s version is too low. It requires a version of 7.0 and up.
Defender Game Racer Wireless G2