DEFENDER Game Racer Wireless G2 - Инструкция (Страница 7)

7
Functions description
Mode Changing
1
）
Digital mode (LED off) Analog mode (LED on)
2
）
Digital mode set as “Default”.
Low Power Consumption (sleep mode)
In order to save batteries power and prolong batteries life, the wireless joypad features a
sleep mode if it has not been used for a period of time. There are 2 ways getting into
sleeping mode:
1. If the wireless joypad is not paired with the receiver for over 15 seconds, the
wireless joypad will get into Sleep mode automatically,
2. If the wireless joypad is connected to the receiver and not used for over 3
minutes it will enter a Sleep Mode
To Exit the Sleep Mode, Press 10,11 or 12 button on the joypad, the receiver LED light will
then turn on.
Low Voltage Alert
When the power of the wireless joypad is weak, the LEDs on the joypad will begin to
flash indicating the current batteries need to be replaced. And the vibration function
would be left to idle automatically.
WARNING: Please ensure that the batteries are inserted correctly. If they are inserted
incorrectly, it may cause personal injury as well as damage to your wireless joypad.
Force Connection
If there are more than one wireless joypad working in the one operating environment,
use the Force Connect button to manually connect a joypad to its respective receiver.
4. Connect the receiver to your PC;
5. Press FC button on the receiver and then FC button on the joypad;
6. You will notice the LED on the receiver will turn stable to indicate the Force
Connection has succeeded.
Turbo function
4
）
Fire Buttons (Key 1-8, 11 and 12) can be set with Turbo function
5
）
Press Turbo and any fire button synchronously, you will notice the LED for Turbo will turn
on to indicate the fire button can perform Turbo and shooting consecutively;
6
）
Press Turbo and the fire button which has been set with Turbo function, the LED for
Turbo will be off, and the Turbo function for this fire button has been cleaned up
Defender Game Racer Wireless G2