TP-Link TL-WA701ND V2 - Инструкция (Страница 14)

13
Englis
h
Now, try to log on to the Web-based configuration page again after the above
settings have been configured. If you still cannot access the configuration page,
please restore your Access Point’s factory default settings and reconfigure your
Access Point following the instructions of this QIG. Please feel free to contact our
Technical Support if the problem persists.
Select Obtain an IP address
automatically
Select Obtain DNS server
address automatically
Note While the reconfiguration is done, you need to change the IP address
settings as below. Then, with the correct hardware connection, you can surf
the Internet successfully.
Select Use the following IP
address
Click OK
Enter the 192.168.0.100 into the
IP address field, 255.255.255.0
into the Subnet mask field