TP-Link TL-WA701ND V2 - Инструкция (Страница 12)

11
Englis
h
T1. How do I restore my Access Point’s configuration to its factory default settings?
T2. What can I do if I forget my password?
1) Try to use the default user name and password: admin, admin;
2) Referring to the file that you have saved in Finish last time you configured
the device, the file will show you the user name and password that you have
configured.
3) If the password is still not the correct one, then you can try to restore the Access
Point’s configuration to its factory default settings referring to previous section
T1 and try to reconfigure your AP by following the instructions of this QIG.
T3. What can I do if I cannot access the web-based configuration page?
Assign a static IP address 192.168.0.100 for your computer first before logging in the
management page. Here takes the procedures in Windows 7 for example.
With the Access Point powered on,
use a pin to press and hold the
RESET button on the rear panel for
5 to 8 seconds before releasing it.
Once the Access Point is reset, the current configuration settings will be lost
and you will need to reconfigure the Access Point. Note
Go to Start > Settings > Control
Panel, and then you will see the
following page.
Click View network
status and tasks
Hold it in for 5 to 8 seconds
Troubleshooting Troubleshooting