VARTA V-CDR301US - Инструкция (Страница 4)

4
Instruction manual
www.varta-electronics.ru
RC battery operation
1. Remove the battery compartment cover
on the back of the RC.
2. Insert two AAA batteries into the battery
compartment making sure that the correct
polarity is observed.
3. Install the cover back.
Caution:
• Take the battery out of the RC if it is
not used for a long time. Do not mix new and
used batteries or different types of batteries.
Weak batteries can leak and severely damage
the RC.
• Do not expose the RC to shock, liquids,
and do not place it in an area with high humid-
ity.
HEADPHOnE COnnECtIOn
• For private listening, insert 3.5-mm
headphone into the stereo headphone jack
(on the front panel of the unit).
• Adjust volume to the appropriate level by
turning VOLUME regulator on the unit or press-
ing VOLUME UP/DOWN buttons on the RC.
• When the stereo headphone jack is
plugged, speakers will disconnect automati-
cally.
MICROPHOnE COnnECtIOn
• Insert the microphone plug into the MIc
input of this unit.
• Press repeatedly FUNCTION button to
select MIC mode.
• Adjust volume to the appropriate level by
turning VOLUME regulator.
AUX InPUt JACK
You can connect the audio output of an ex-
ternal device (such as a CD-player) to this unit,
to listen to the sound of that device through
the amplifier of this unit.
• To connect an external audio device
(eg. MP3 player), please use a standard ste-
reo cable (not included) with 3.5-to-3.5 mm
plugs to connect the headphone out or audio
line-out of the external device to the AUX in-
put of this unit.
• Press FUNCTION button repeatedly to
select AUX mode. AUX will be displayed.
• Turn on the external device.
gEnERAL OPERAtIOnS
• Press STANDBY button to switch the
unit on or off.
• Rotate VOLUME regulator on the unit or
press VOLUME UP/DOWN buttons on the RC
to adjust the sound volume level.
• Press MUTE button to switch off the
sound. Press this button again or adjust vol-
ume to resume the sound.
• Press EQ button repeatedly to select
one of the eveilable equalizer modes: CLAS-
SIC - ROCK - POP - JAZZ - FLAT.
• Press DBBS button to switch on or off
the dynamic bass boost function on or off.
CLOCK, tIMER AnD SLEEP
Clock operation
• Press and hold MEMORY/CLOCK but-
ton on the unit or CLOCK ADJ./MEMORY but-
ton on the RC to display the clock. Press this
button again to show 12HR or 24 HR. Press
/ buttons to select 12-hour or 24-hour
clock display mode. Press MEMORY/CLOCK
button on the unit or CLOCK ADJ./MEMORY
button on the RC to confirm.
• When hour digits are blinking press
/ buttons to set hours. Press MEMORY/
CLOCK button on the unit or CLOCK ADJ./
MEMORY button on the RC to confirm; minute
digits will start blinking. Press
/ buttons
to set minutes. Press MEMORY/CLOCK but-
ton on the unit or CLOCK ADJ./MEMORY but-
ton on the RC to confirm
• To show the clock press and hold MEM-
ORY/CLOCK button on the unit or CLOCK
ADJ./MEMORY button on the RC at any time
the unit is on.