Petsafe Staywell Original - Инструкция (Страница 34)

34 www.petsafe.net
FI
SV
DA
NO
RU
EN
Before installing your pet door
please read the following step-by-
step instructions carefully.
Tools required
• Pencil
• Ruler
• Jig or Keyhole Saw
• Drill
• 5 mm ( 3 /
16
”) drill bit
• Screwdriver
• Tape measure
• Glue
• Sand paper
Measurement and marking
Measure the belly height of your pet (Fig. 1).
Mark this measurement on the outside of your door and draw a straight
horizontal line (Fig. 2).
Please bear in mind that this line will eventually be the bottom of the
hole you will cut in your door and that the frame of the pet door will be
slightly lower. If necessary, this line may have to be raised slightly to
account for this.
FIG.1 FIG.2
Cutting a hole for your pet door
a) In Wood and PVC/uPVC/Metal
The hole that you cut will depend on the size of pet door
you have purchased:
Small: 185 mm x 158 mm (7 1 /
4
” x 6 1 /
4
”)
Medium: 281 mm x 237 mm (11 1 ⁄
8
” x 9 3 /
8
”)
Large: 370 mm x 314 mm (14 5 ⁄
8
” x 12 3 /
8
”)
All dimensions are displayed
height x width (Fig. 3).
Not to scale - for best
results you should refer
to the enclosed
cutting template.
(X)
(x)
Wooden doors
PVC/uPVC/Metal
Width
Height
FIG.3