VICONTE vc-200 - Инструкция (Страница 4)

CLEAN AND CARE
WARNING!
Always switch off and unplug the unit before cleaning.
Hard water causes the appearance of scale on the “sprayer”, on the inner parts of the body and on the water tank; it leads to improper
operation of the unit and appearance of white deposit on the interior. In order to avoid it, it is necessary to clean the sprayer every week
and change water as often as possible, as well as to perform cleaning of the fi lter-cartridge. If you are not going to use the unit for a long
time: pour out water from the tank and the operating chamber of the “sprayer”, wash the water tank, wash and clean the operating chamber
of the “sprayer” and the “sprayer” itself, dry the unit carefully and take it away for storage.
WEEKLY CARE
• Once a week carefully wash the water tank and the operating chamber under the water tank with a neutral washing liquid solution.
After that, carefully rinse them with water.
• Add 5-10 drops of the cleaning agent on the “sprayer”; wait about 2-5 minutes. Use the brush to remove the deposit from the
surface of the “sprayer”.
Note: As a cleaning agent for the “sprayer” you can use substances for scale removal in kettles.
• Do not immerse the unit into water or other liquids.
CLEANING THE FILTER
• Clean the fi lter after about 1000 l of water passed through it, and when using hard water or appearance of “white deposit” on the
furniture, more often.
• Take the handle and remove the water tank from the body.
• Turn over the water tank, unscrew the lid by turning it anti clockwise and remove the fi lter-cartridge, by turning it anti clockwise.
• Put the fi lter-cartridge for 10 minutes into the bowl with vinegar, take out the fi lter-cartridge and wash it under tapping water.
• Place the fi lter-cartridge back on the lid, by turning it clockwise.
V _200_instruction_(16-4427).indd 5 V _200_instruction_(16-4427).indd 5 22.06.2011 17:24:17 22.06.2011 17:24:17