Operation – Инструкция по эксплуатации VICONTE vc-200

Страница 3

Advertising
background image

• Do not leave the unit unattended in closed rooms otherwise condensation can appear on the furniture and the walls, that is why

we recommend keeping the door of the room, where the humidifi er is used, half-opened.

• Never use the unit outdoors.

• Use only the removable parts which are supplied with the unit.

• Never allow children to use the unit as a toy.

• Close supervision is necessary when children or disabled persons use the unit.

• This unit is not intended for usage by children or disabled persons unless they are given all the necessary instructions on safety

measures and information about danger, which can be caused by improper usage of the unit.

• Do not operate the unit without water. Disconnect the unit from the power supply when the water tank becomes empty.

• Do not use soda water or any perfume additives.

• Unplug the unit before removing the water tank.

• Do not cover the “steam” outlets and avoid getting of foreign objects inside.

• Do not immerse the unit into water or other liquids.

• Do not move or tilt the unit during its operation.

• Always unplug the unit and pour out water from the water tank when cleaning the unit or when you do not use it. Unplug the unit

before moving it to another place.

• Do not touch the power plug with wet hands.

• Before using the unit, closely examine the power cord and make sure that it is not damaged. Do not use the unit, if its power cord

is damaged.

• Do not dismantle the unit yourself, if any malfunction is detected, apply to the nearest authorized service center.

• Regularly clean the unit; do not allow cracks to appear on the sprayer.

• Keep the unit out of reach of children.

OPERATION

• Place the device on an even dry surface.

• Remove the reservoir and unscrew the fi lter, pour in clean water and tightly screw the fi lter fi xing device.

• The volume of the water reservoir is 4 liters.

• Wipe the surface of the reservoir dry using a soft cloth.

• Place the reservoir on the base.

• Plug the device in the socket.

• Turn the regulator to turn on. The indicator light will turn on.

• Use MIST+ and MIST- buttons to adjust the strength of the steam fl ow.

• When the water in reservoir is out the indicator changes the colour from blue to red.

V _200_instruction_(16-4427).indd 4

V _200_instruction_(16-4427).indd 4

22.06.2011 17:24:17

22.06.2011 17:24:17

Advertising