Vitek VT-3505 - Инструкция (Страница 5)

ENGLISH
5
( ), sound signal ( ) as alarm signals or you can
switch off alarm.
Set the DIMMER to the AUTO OFF position. In this
case when the alarm is activated, the display will
switch on as well.
Alarm snooze
Alarm signal will be continued during 30 minutes if
you do not press any buttons.
You can switch off the alarm signal for 9 minutes by
pressing of the SNOOZE button. In 9 minutes the
alarm signal will be repeated.
To switch off alarm snooze function, press the
button, if radio is selected as alarm signal, it will
switch off automatically in 30 minutes.
Set the DIMMER to the AUTO OFF position. During
switching on the display, press the SNOOZE/SLEEP
button to switch on the alarm snooze function, the
alarm signal and the display will switch on.
Auto switching off the radio
You can set the time for the radio to switch off. In the
radio mode press the SNOOZE/SLEEP button, “90”
will appear on the display, and the radio will switch
off automatically in 90 minutes. To reduce the time,
press the SNOOZE/SLEEP button, symbols 60-30-
15 will be displayed. In the present time the radio will
switch off. If you want to switch off the radio before
the preset time, press the button.
Switching off the display lighting
When the radio is switched off, set the DIMMER
switch to the AUTO OFF position and in 15 seconds
the display lighting will switch off automatically.
Press any button to switch it on.
RESET button
Use a ball-point pen to press the RESET button
when replacing the battery or if the unit malfunc-
tions, the settings will return to the default ones, all
the stored data (current time and alarms settings)
will be lost.
Image projection
To project time, turn the projector in the necessary
direction. Switch on the projector, by pressing the
PROJECTION ON/OFF button.
To focus the projected image, rotate the FOCUS
control. To turn the projected image to 180° press
the 180° FLIP button.
Press the PROJECTION ON/OFF button to switch
off the projector.
Note: The unit projects the image on the ceiling or
the wall of the darkened room. Maximal distance is
90 – 270 cm.
Connecting the external device
To connect the external device use the LINE IN jack
Connect the external device using the 3,5 mm Jack
audio cable (not supplied with the unit).
Press the button to listen to the sound from the
external device. Use the VOLUME control to set the
desired volume level.
Note: Electromagnetic interferences can influence
operation of the unit. In this case disconnect the unit
from the power sources, and then connect again. If
necessary change the location of the unit.
Clean and care
Unplug the unit before cleaning. Use a soft cloth
to clean the unit. Do not use liquid or aerosol sub-
stances for cleaning.
Technical specifications
Power supply: 240 V AC, 50 Hz;
Reserve power supply: Battery 3V CR2032
Power consumption: < 5W
Clock accuracy movement: ± 1с
Frequency range:
AM: 530 – 1600 kHz
FM: 88 – 108 MHz
Temperature range: from 0° till 50°С (from 32° till 122°
F)
The manufacturer reserves the right to make
changes to the characteristics of the device without
prior notice.
Service life of appliance - 3 years
Guarantee
Details regarding guarantee conditions can be ob-
tained from the dealer from whom the appliance
was purchased. The bill of sale or receipt must be
produced when making any claim under the terms
of this guarantee.
This product conforms to the EMC-Re-
quirements as laid down by the Council
Directive 89/336/EEC and to the Low
Voltage Regulation (23/73 EEC)
3505IM.indd 5 3505IM.indd 5 21.05.2010 16:22:52 21.05.2010 16:22:52