Sony SCPH-90008 - Инструкция (Страница 38)

38 Connecting to a network
You can enjoy online games by connecting the PlayStation ® 2 console to a
broadband network. To play all online games, you will need the following:
• A network compatible PlayStation
® 2 game
• Broadband Internet service
• A commercially available Ethernet cable
• A memory card (8MB) (for PlayStation
® 2) (sold separately)
Hints
• You cannot play online games with this console using a dial-up or ISDN
connection.
• USB connectivity from the External Network Device to the USB connector is not
supported.
• There are two types of Ethernet cables: straight-through cable and crossover cable.
Ensure that you use the correct type of cable when connecting your PlayStation ® 2
console to your Broadband Internet connection. Refer to the Instruction Manual
supplied with the network device, or your Broadband Internet Service Provider for
details.
You can connect the console to a network using an Ethernet cable
connected to the NETWORK connector on the console rear. You can
connect to a 100 Base-TX or 10 Base-T network. Refer to the instructions
supplied with the network device for details.
Basic network setup
Hint
When connecting the console and a PC to the network, a network device such as a
router or a hub may be required. Refer to the instructions supplied with the network
device for details.
For more information on network setup, visit www.playstation.com
Networking
Connecting to a network
Please be aware that Network Gaming is not supported in all countries
at the time of going to print.
Connecting with an Ethernet cable
MEMORY CARD MEMORY CARD
Network line
This will vary depending on the
type of broadband service in your
home. Network equipment
The type of equipment used will also
vary depending on the type of
service.
Commercially available
Ethernet cable
PC
Broadband modem, router etc.