Philips FC8952 - Инструкция (Страница 10)

Washable Ultra Clean Air HEPA 13 exhaust filter
Clean the washable Ultra Clean Air HEPA 13 filter every 6 months. The filter can be cleaned 4
times. After these 4 times, the filter has to be replaced. Replace the washable Ultra Clean Air HEPA
13 filter with a Philips filter of the correct type (see chapter ‘Ordering accessories’).
1 Switch off and unplug the appliance (Fig. 24).
2 Remove the HEPA exhaust filter grille and remove the washable Ultra Clean Air HEPA 13
exhaust filter from the appliance (Fig. 30).
Note: Do not remove the silencer behind the washable Ultra Clean Air HEPA 13 exhaust filter. You do not
have to clean this part.
3 Rinse the filter under a warm tap (Fig. 31).
Never clean the washable Ultra Clean Air HEPA 13 filter with a brush.
Note: Cleaning does not restore the original colour of the filter, but does restore its filtration power.
4 Carefully shake the water from the surface of the filter.
5 Let the washable Ultra Clean Air HEPA 13 exhaust filter dry completely before you place it
back into the appliance.
6 Place the dry washable Ultra Clean Air HEPA exhaust filter back into the appliance (Fig. 32).
7 To close the HEPA exhaust filter grille, first align the lugs at the bottom of the grille with the
slots in the appliance (1). Then press the top of the grille towards the appliance until the grille
locks into place (2) (‘click’) (Fig. 33).
Air filter
Clean the air filter every 6 months.You do not have to replace the filter.
1 Open the cover (Fig. 34).
2 Turn the handle with the air filter counter clockwise (1) and remove it from the lid
(2). (Fig. 35)
3 Remove the air filter and clean it under the tap. (Fig. 36)
4 Let the air filter dry completely before you reattach it to the handle.
5 Reattach the air filter back onto the lid (1) and turn it clockwise (2). (Fig. 37)
6 Close the cover. (Fig. 38)
English 10