English, Useful tips, Storage – Инструкция по эксплуатации Binatone SI-2550

Страница 7: Selection of temperature settings

Advertising
background image

7

77

77

ENGLISH

scale and dust. If the blast of steam becomes weaker, set the

control knob (9)

(9)

(9)

(9)

(9) into the «0» position and wait for 12-15

seconds until the iron gets hot again. Then once again set the

control knob into the «Self-Clean» position.

7. When the water tank (5)

(5)

(5)

(5)

(5) is completely empty, set the steam

control knob (9)

(9)

(9)

(9)

(9) into the «0» position.

8. Put the appliance into a vertical position and re-heat the iron.

9. To complete the cleaning process; Iron a piece of a clean old

cotton cloth in order to clean the sole plate (12)

(12)

(12)

(12)

(12) of any remain-

ing dust and scale and to evaporate the remaining water. When

you have finished ironing, always switch the appliance off and

disconnect from the electrical supply.

Storage

Before storing the iron, make sure it is disconnected from the

mains supply outlet and is completely cooled down. Set the tem-

perature control knob and the steam control knob into the «0»

position. Drain the remaining water from the tank (5)

(5)

(5)

(5)

(5) by opening

the cover (4)

(4)

(4)

(4)

(4) and holding the iron upside down over the sink. Store

the appliance in the upright standing position.

USEFUL TIPS

Selection of temperature settings

!

Before ironing, we recommend that you orga-

nize your clothes, into the types of material and

the recommended temperature settings.

!

We recommend that you start ironing, using the

lower temperature settings first: the appliance

gets hot quicker than it cools down.

!

When ironing articles made with combinations of fibers, start

with the temperature recommended for the most delicate mate-

rial first (for example, to iron a cloth made of cotton and polyester

select the temperature recommended for ironing polyester first).

!

If the manufacturer’s label, which gives the recommended tem-

perature, is missing and the type of material is known, follow

the recommendations below.

Fabric type

Temperature control settings Steam ironing

Acrylic

Polypropylene •

No

Polyethane

Acetate

Triacetate

Polyester

Polyamide

••

Yes

Nylon

Viscose

Rayon

Silk

••

Not recommended

Wool

••

Yes

Cotton

•••

Yes

Linen

•••

Yes

Advertising