Vitek VT-5016 BK - Инструкция (Страница 3)

ENGLISH

Operating manual
Read this manual carefully before connecting
and setting up this appliance. It is necessary to
follow all the warnings and recommendations
on operating this appliance contained in this
manual.
Keep this manual for future reference.
Safety guards
• In order to avoid electric shock do not try to
open the housing of this appliance.
• Servicing should be undertaken by qualified
professionals at service centers only.
• This appliance should be connected to a
power supply line with voltage 00-240V
and frequency 50-60Hz through an adapter.
Check if the power supply line voltage meets
the adapter’s operating voltage. Use only
the adapter included into the delivery set for
connecting to power supply line.
• In order to avoid fire or electric shock do not
expose this appliance to rain or moisture,
do not allow drops or splashes falling on the
appliance. In order to avoid fire or electric
shock do not store this appliance at any
places with high humidity. It is forbidden to
immerse this appliance into water.
• Install the appliance so that to be able
to disconnect the adapter in case of
malfunction.
• Do not disconnect the adapter when the
appliance is working.
• Install the appliance at the places with
sufficient ventilation.
• Do not place this appliance near heat
sources or at places exposed to direct
sun rays, oil vapors, excessive dusting or
vibration.
• Do not allow any objects falling inside the
appliance through the holes in its housing as
it can lead to fire and electric shock. In case
of such accident disconnect the appliance
from the power supply line and turn to
qualified professionals for consultations
before using the appliance again.
• Do not allow the appliance to fall down.
• Do not expose the appliance to extremely
high or low temperatures. Storage
temperature range is from -40°С up to 60°С,
and operating temperature range is from
-5°С up to 40°С.
• Disconnect from power supply line before
cleaning. Use soft cloth for cleaning the
appliance. It is forbidden using liquid or
aerosol detergents for cleaning.
• Do not use this appliance while driving. Do
not use this appliance at the places where
a driver could see the picture on its display.
This is distracting for the driver, and may
lead to serious accident causing trauma or
property damage.
• Do not press on the appliance’s display. Do
not touch it by any sharp objects as you can
damage it.
Attention! Bright and dark points on the LCD
are not the sigh of TV-set malfunction. This is
the norm of TFT-LCD technology.
Description
. telescopic antenna
2. TFT-LCD display
. button for entering menu MENU
4. button PICT
5. auto search button AUTO
6. operating modes switching button MODE
7, 8.volume adjustment control buttons
VOL + / -
9, 0. channels switching buttons CH + / -
. place of remote control signal photo
receiver
2. button for switching on Power
. jack for connecting the external antennae
4. jack AV In 
5. jack AV In 2
6. jack for connecting head phones
7. jack for connecting AC-adapter DC +2V
8. speaker
Functions of Remote Control Buttons
• Number buttons 0 - 9 and button - / -- are
used for inputting channel number (0- 255).
Input channel number from 0 to 9 using
corresponding button on remote control. If
number is more then 9 first press button - /
--, the corresponding symbol will appear
on LCD. Then dial the channel number by
setting number for each digit using number
buttons.
• СН + / CH- – buttons for switching between
channels
• VOL+ / VOL - – button for adjusting volume
level
• PICT – using this button you can choose one
of five picture modes: standard, soft, vivid,
light, personal.
5016IM.indd 3 21.02.2008 11:25:59