Инструкция по эксплуатации Sony KV-SW292

Страница 25

Advertising
background image

25

Additional Information

Sony KV-SW292M91 Group Q9 (

GB,

RU)_2-655-047-11 (1)

Picture slant

Abnormal color
patches

TV cannot receive
stereo broadcast
sound

or

Stereo broadcast
sound switches
on and off or is
distorted.

Teletext display is
incomplete
(snowy picture or
double images).

TV cannot receive
FM radio station.

The 1 (standby)
indicator on your
TV flashes red
several times after
every three
seconds.

The TV screen
sometimes goes
blank for
slightly longer
than usual
during channel
change.

TV cabinet creaks.

A small “boom”
sound is heard
when the TV is
turned on.

• Keep external speakers or other electrical equipment away from the TV.

• Display the “Picture Position” under “Setup” menu, then adjust “Picture

Rotation” and “Picture V-Position” so that the picture is aligned to the TV
screen (see page 21).

• Keep external speakers or other equipment away from the TV. Do not

move the TV while the TV is turned on. Press ! (main power) on the TV
to turn off the TV for about 15 minutes, then turn it on again to
demagnetize the TV.

• Check the antenna cable and connection on the TV, VCR and at the wall

(see page 22).

• Check the antenna setup. Contact a Sony dealer for advice.

• Check the antenna cable and connection on the TV, VCR and at the wall

(see page 22).

• Check the antenna setup. Contact a Sony dealer for advice.

• Display the “Channel Setup” menu and set the “Signal Booster” to “Auto”

from “Manual Program” (see page 20).

• Try using an external booster.

• Use the fine tuning (“Fine”) function (see page 20).

• Connect a separate FM antenna and the TV channel source through an

antenna selector (switch) to your TV (see page 22).

• Count the number of times the 1 (standby) indicator flashes.

Press ! (main power) to turn off your TV. Contact your nearest Sony
service center.

• The “Signal Booster” is functioning to detect a weak signal. This does not

indicate a malfunction.

• Changes in room temperature sometimes make the TV cabinet expand or

contract, causing a noise. This does not indicate a malfunction.

• The TV’s demagnetizing function is working. This does not indicate a

malfunction.

Symptom

Solutions

01GB08ADV-SOEMRus.p65

9/5/05, 2:37 PM

25

Black

Advertising
Эта инструкция подходит к следующим моделям: