ZELMER 40Z011 - Инструкция (Страница 28)

30
GW40-005_v02
After operation
Set the thermostat in “OFF” position in order to switch off
●
the appliance.
Always disconnect form mains after usage.
●
Let the
appliance cool down before disassembling and
cleaning.
Cleaning and maintenance
Wash and wipe thoroughly all parts before storage.
●
Make sure that the plug and heating plate are dry
●
before connecting the thermostat to the heating plate.
If necessary, wipe thoroughly with dry cloth and leave for
drying for a while.
Thermostat
On no account allow the water get inside the thermostat!
●
Do not clean under running water and do not immerse!
Clean the thermostat with damp cloth only.
Heating plate
It is forbidden to use caustic cleaning agents, scourers
●
with scouring agents, wire wool, etc., as they can
damage non-stick surface.
Remove severe dirt with damp cloth. Use a soft bottle
●
brush for cleaning the grids.
Base, grease drip tray, lid
Clean the base, the lid and grease drip tray with damp
●
cloth or under running water.
The appliance is not intended for being washed
in dishwashers!
Ecology – Environment protection
Each user can protect the natural environment.
It is neither difficult nor expensive.
In order to do it: put the cardboard packing into
recycling paper container; put the polyethylene
(PE) bags into container for plastic.
When worn out, dispose the appliance to particular disposal
centre, because of the dangerous elements of this appliance,
which can be hazardous for natural environment.
Do not dispose into the domestic waste disposal!!!
The manufacturer/importer does not accept any liability for any
damages resulting from unintended use or improper handling.
The manufacturer/importer reserves his rights to modify the product
any time in order to adjust it to law regulations, norms, directives,
or due to construction, trade, aesthetic or other reasons, without
notifying in advance.