ZELMER 32Z012 - Инструкция (Страница 29)

31
4 Clean the outsider of the motor housing (10) with damp,
gentle cloth.
ATTENTION: Do not immerse the motor housing (10) in
water or other liquid.
Do not clean the outside of the housing
●
(10) with
aggressive detergents such as emulsion milk or pastes,
etc. They can remove information graphic symbols.
Do not clean the transparent jug
●
(9) with harsh sponges
or clothes.
After washing dry thoroughly all the parts of the
●
appliance.
Cutting unit disassembling
Unplug from the mains supply outlet.
●
Empty the jug
●
(9).
Remove the lid
●
(8) from the blender jug (9). Turn the
blender jug (9) „upside down” and place on the flat and
firm surface.
Turn the blocking ring counter clockwise. Remove
●
carefully with a gasket.
ATTENTION: The cutting blades are sharp. Handle
them carefully.
Cutting unit assembling
Turn the blades upside down in order to assemble them
●
and insert at first the gasket at the jug opening flange (9)
and blades inside the jug (9).
Insert blocking ring and turn it clockwise until it runs.
●
Make sure that the blocking ring is screwed to the jug (9).
It influences the tightness of the connection.
After assembling, turn the jug
●
(9) upside down and place
it on the motor housing (10) so, that the protrusions in
bottom part of the jug (9) are fitted with the protrusions
top part of the motor housing (10).
The handle of the blender jug (9) shall be placed on the right
side of the appliance.
Ecology – environment protection
Each user can protect the natural environment. It is neither
difficult nor expensive.
In order to do it: put the cardboard packing into
recycling paper container; put the polyethylene
(PE) bags into container for plastic.
When worn out, dispose the appliance to
particular disposal centre, because of the
dangerous elements of this appliance, which
can be hazardous for natural environment.
Do not dispose into the domestic waste disposal!!!
The manufacturer/importer does not accept any liability for any
damages resulting from unintended use or improper handling.
The manufacturer/importer reserves his rights to modify the product
any time in order to adjust it to law regulations, norms, directives,
or due to construction, trade, aesthetic or other reasons, without
notifying in advance.