ZELMER 28Z017 - Инструкция (Страница 51)

51
If you do not use the iron, even for short time, switch it off, turning –
Temperature Dial in anti-clockwise direction to „ MIN”.
If you do not use the iron, even for short time, switch the steam function –
off, setting the knob on position.
Never iron and clothes or fabrics that are being worn by human or –
pets.
Never direct the steam to human or pets. –
Use self-cleaning function at least once a month. –
Hints for ironing
1. Sort out the articles to be ironed according to the type of fabric. This
will minimize the frequency of temperature adjustment for different
garments.
2. Test ironing a small area on the backside or inside the garment if you
are unsure about the type of fabric. Start with a low temperature and
increase gradually.
3. Wait for about three minutes before ironing heat sensitive fabrics.
Temperature adjustment needs certain time to reach the required level
no matter it is higher or lower.
4. Delicate fabrics such as silk, wool, velour, etc. are best ironed with an
ironing cloth to prevent shine marks.
5. You may need a few times of press to activate the spray, burst and
vertically burst function.
6. Read the garment labels and follow the manufacturer’s ironing
instructions which are often shown by symbols similar to the
following:
Temperature settings
○ Acetate
○ Elastics
○ Polyamide
○ Polypropylene
○ Cupro ○ Triacetate
○ Polyester ○ Viscose
○ Proteins ○ Wool
○ Silk
○ Cotton
○ Linen
Technical data
The iron technical parameters are included at the name plate. The iron is
I class appliance, equipped with supplying cord and plug with grounding.
ZELMER iron meets the requirements of effective standards.
The appliance meets the requirements of the following directives:
Low Voltage Device (LVD) – 2006/95/EC –
Electro- Magnetic Compatibility (EMC) – 2006/108/EC –
The product is marked with CE symbol on the name plate.
Get to know your iron
1. Sole plate
2. Temperature Dial
3. Dial Pointer
4. Control lamp (orange)
5. Water inlet cover
6. Spraying nozzle
7. Steam control/self-cleaning knob
a) On position
b) Off position
c) Self-cleaning position
8. Water Spray Button
9. Burst of steam button
10. Water vessel