Vitek VT-3488 - Инструкция (Страница 8)

7
3. Press the BAND button (2) or (29) repeatedly to select AM (MW) or FM band.
4. Press the BAND button (2) or (29) repeatedly to select AM (MW) or FM band.
Manual Tuning - Press and hold the TUNING UP or DOWN buttons (15)/(33) until the display approach-
es your desired station. Then tap the buttons repeatedly until the display shows the exact frequency.
Auto tuning - Press TUNING UP or DOWN buttons (15/33) hold for 1 sec, then release. The tuner will
move up or down to the next available station.
5. When finished listening, press the POWER button (8)/(31) to turn the system OFF.
Storing preset stations
The unit enables you to program 10 stations of FM and 10 stations of AM (MW) band.
1. Tune to the station you wish to store by pressing the tuning up or down
buttons (15) or (33).
2. Press the PROGRAM button (14) or (34) once.
3. Press the MEM-UP or MEM-DN button (6) or (5)/(28) or (36) repeat-
edly to set the desired preset station number.
4. Press the PROGRAM button (14) or (34) again. The station is stored
in the allocated channel.
5. To store other stations, repeat above steps.
Recalling preset stations
Press the MEM-UP or MEM-DN button (6) or (5)/(28) or (28)/(36) repeatedly to set the desired preset
station number.
CD PLAYBACK
1. Press the POWER button (8) or (31) to turn the unit 'ON'. The LCD
display (11) will illuminate. Select CD mode using FUNCTION button
(3)/(32).
2. If there is no DISC inside, a "- - -" display will appear.
Example: When there is no disc
Loading a disc
1. Open the CD Player Lid (23).
2. Load a CD inside CD compartment (22) and then close the CD Lid
(23). After that, TOC reading will start.
Example: after reading TOC
ENGLISH