Vitek VT-3488 - Инструкция (Страница 10)

9
PROGRAMMED PLAYBACK
The CD player enables you to program up to 20 tracks in a sequence of your choice. First select CD
stop mode. If more than 20 tracks are entered, "MEMORY" and "- -" will flashing on the display to indi-
cate that memory is full and no further tracks should be entered for programming.
1. Press the PROGRAM button (14) or (34) ones.
Example: Programming input mode
2. Press the CD SKIP FORWARD, BACKWARD (15) or (33) buttons
to select the desired track to be programmed.
Example: Select track 4
3. Pressing PROGRAM button again to store track 4.
4. Repeat steps 2 and 3 to continue programming.
Reviewing program
Pressing PROGRAM button (14)/(34) will display on LCD (11) the track number you entered.
5. Press PLAY/PAUSE button (12)/(35) to play the program.
Note: Press the PROGRAM button (if programmed tracks still exist)
then PLAY/PAUSE button, the program playback will start again.
Clear the program
Press PROGRAM button in stop mode to review program tracks, then press the STOP button (10)/(29)
in order to clear the preset programs. (Or open the CD door or change function to other mode).
MP3 DISC PLAYBACK
1. Press the POWER button (8) or (31) to turn the unit 'ON'. The LCD display (11) illuminate. Select CD
mode using FUNCTION button (3)/(32).
2. If there is no DISC inside, a "- - -" display will appear.
Example: When there is no disc
Loading a disc
1. Open CD player lid (23).
2. Load an MP3 disc inside CD compartment and then close the CD lid. After that, reading TOC will
start.
Example: After reading TOC (total folder)
ENGLISH