JVC KW-XG707 - Инструкция (Страница 37)

ENGLISH
37 REFERENCES
Continued on the next page
Symptom Remedy/Cause
MP3/WMA/AAC
• Tracks do not play back in the order you have
intended them to play.
Playback order is determined when files are recorded.
• Elapsed playing time is not correct. This sometimes occurs during play. This is caused by how
the tracks are recorded on the disc.
• “PLEASE” and “EJECT” appear alternately on
the display.
Insert a disc that contains MP3/WMA/AAC tracks.
• Correct characters are not displayed (e.g.
album name).
This unit can only display letters (Roman and Cyrillic
alphabets—upper case), numbers, and a limited number
of symbols.
USB device
• Noise is generated. The track played back is not an MP3/WMA/AAC/WAV
track. Skip to another file. (Do not add the extension code
<.mp3>, <.wma>, <.m4a>, or <.wav> to non-MP3/
WMA/AAC/WAV tracks.)
• “CHECK” keeps flashing on the display. • Readout time varies depending on the USB device.
• Do not use too many hierarchy, folders, and empty
folders*.
• Turn off the power then on again.
* Folder that is physically empty or folder that contains
data but does not contain valid MP3/WMA/AAC/WAV
track.
• “NO FILE” flashes on the display.
• “NO USB” appears on the display. Attach a USB device that contains tracks encoded in an
appropriate format.
• “READ” and “FAILED” appear alternately on
the display.
The total number of tracks could not be accessed properly.
• Correct characters are not displayed (e.g.
album name).
This unit can only display letters (Roman and Cyrillic
alphabets—upper case), numbers, and a limited number
of symbols.
• While playing a track, sound is sometimes
interrupted.
MP3/WMA/AAC/WAV tracks have not been properly
copied into the USB device.
Copy MP3/WMA/AAC/WAV tracks again into the USB
device, and try again.
EN32-37_KW-XG707_001A_1.indd 37 EN32-37_KW-XG707_001A_1.indd 37 3/20/07 3:08:57 PM 3/20/07 3:08:57 PM