Candy GOY 0850 D - Инструкция (Страница 49)

49
Description of controls
Door handle
А
Press the finger-bar inside the door handle to open the door.
IMPORTANT!
A special safety device prevents the door from opening at the
end of the wash/spin cycle. At the end of the spin phase wait
up to 2 minutes before opening the door.
Door locked indicator
B
The “Door Locked” indicator light is illuminated when the door is fully closed and the ma-
chine is ON.
When “START/PAUSE” is pressed on the machine with the door closed the indicator will
flash momentarily and then illuminate.
If the door is not closed the indicator will continue to flash.
A special safety device prevents the door from being opened immediately after the end
of the cycle.
Wait for 2 minutes after the wash cycle has finished and the Door Locked light has gone
out before opening the door. At the end of cycle turn the program selector to OFF.
“Start/Pause” button
С
Press to start the selected cycle.
NOTE: When the start button has been pressed, the appliance can take few sec-
onds before starts working.
CHANGING THE SETTINGS AFTER THE PROGRAMS HAS STARTED (PAUSE)
Press and hold the “START/PAUSE” button for about 2 seconds, the flashing lights on the
options buttons and time remaining indicator will show that the machine has been paused,
adjust as required and press the “START/PAUSE” button again to cancel the flashing
lights.
If you wish to add or remove items during washing, wait 2 minutes until the safety device
unlocks the door.