AEG TC120 - Инструкция (Страница 4)

4
Making the Vacuum Cleaner Ready
for Use
Connect suction hose and suction tube
together until the catch engages
Firmly connect the suction hose handle to the
suction tube.
Adjust Telescopic Tube
(depending on model)
The tube can be adjusted to the required work-
ing height by sliding the sleeve.
Connect Suction Hose
(depending on model)
Insert the connector on the suction hose in the
suction inlet. The connector locks in place and
can be rotated freely (depending on model).
To remove the hose, press the release button and
pull out the connector.
Mains Connection/Cable Rewind
The mains cable is in the cable compartment.
Pull out the cable and plug into a mains socket.
After use, unplug from the mains. Press the foot
button, the cable is rolled up automatically.
Switching On
Switch On and Off
You can switch the appliance on and off
by pressing the On/Off button. When
switched on, the mains power indicator
is illuminated (depending on model).
Adjusting the Suction Power
(depending on model)
The suction power can be adjusted to suit the
specific situation using the electronic power
regulation. By reducing the suction power, you
can significantly reduce the amount of force
needed to push the nozzle.
On the Appliance
949126ts.book Seite 4 Dienstag, 12. Dezember 2000 11:01 11