Инструкция по эксплуатации Beko WMB 91242 LC

Страница 34

Advertising
background image

Detergent residue in the detergent drawer.

• Detergent is put in wet drawer. >>> Dry the detergent drawer before putting in

detergent.

• Detergent has gotten damp. >>> Keep detergents closed in an environment free

of humidity and do not expose them to excessive temperatures.

• Water pressure is low. >>> Check the water pressure.

• The detergent in the main wash compartment got wet while taking in the prewash

water. Holes of the detergent compartment are blocked. >>> Check the holes

and clean if they are clogged.

• There is a problem with the detergent drawer valves. >>> Call the Authorized

Service Agent.

• Detergent might be mixed with the softener. >>> Do not mix the softener with

detergent. Wash and clean the dispenser with hot water.

• Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,

please see "Cleaning the loading door and the drum".

There is detergent left on the laundry.

• Excessive laundry was loaded in. >>> Do not load the machine in excess.

• Wrong programme and temperature were selected. >>> Select the proper

programme and temperature for the laundry to be washed.

• Wrong detergent was used. >>> Select the proper detergent for the laundry to be

washed.

• Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,

please see "Cleaning the loading door and the drum".

Too much foam forms in the machine.

• Improper detergents for the washing machine are being used. >>> Use

detergents appropriate for the washing machine.

• Excessive amount of detergent is used. >>> Use only sufficient amount of

detergent.

• Detergent was stored under improper conditions. >>> Store detergent in a closed

and dry location. Do not store in excessively hot places.

• Some meshed laundry such as tulle may foam too much because of their texture.

>>> Use smaller amounts of detergent for this type of item.

• Detergent is put in the wrong compartment. >>> Put the detergent in the correct

compartment.

• Softener is being taken early. >>> There may be problem in the valves or in the

detergent dispenser. Call the Authorized Service Agent.

• Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,

please see "Cleaning the loading door and the drum".

Foam is overflowing from the detergent drawer.
• Too much detergent is used. >>> Mix 1 tablespoonful softener and ½ l water and

pour into the main wash compartment of the detergent drawer.

C

Put detergent into the machine suitable for the programmes and maximum loads

indicated in the “Programme and consumption table”. When you use additional

chemicals (stain removers, bleaches and etc), reduce the amount of detergent.

Advertising