Special programmes, Temperature selection, Spin speed selection – Инструкция по эксплуатации Beko WMB 91242 LC
Страница 20
20
EN
compartment II. When the programme is
over, leave the loading door ajar so that
the inside of the machine gets dry.
C
This is not a washing programme. It is
a maintenance programme.
C
Do not run the programme when
there is something in the machine. If
you try to do so, the machine detects
that there is a load inside and aborts
the programme.
Special programmes
For specific applications, select any of the
following programmes.
• Полоскание (Rinse)
Use this programme when you want to
rinse or starch separately.
• Отжим+Слив (Spin + Drain)
Use this programme to apply an
additional spin cycle for your laundry or to
drain the water in the machine.
Before selecting this programme, select
the desired spin speed and press Start /
Pause / Cancel button. The machine will
spin the laundry with the set spin speed
and drain the water coming out of them.
If you wish to drain only the water
without spinning your laundry, select the
Pump+Spin programme and then select
the No Spin function with the help of Spin
Speed Adjustment button. Press Start /
Pause / Cancel button.
C
Use a lower spin speed for delicate
laundries.
Temperature selection
Whenever a new programme is selected,
the maximum temperature for the
selected programme appears on the
temperature indicator.
To decrease the temperature, press
the Temperature Adjustment button.
Temperature decreases with increments
of 10° and finally, “-” symbol indicating
the cold wash option appears on the
display.
C
If you scroll to cold wash option and
press Temperature Adjustment button
again, the recommended temperature
for the selected programme appears
on the display. Press the Temperature
Adjustment button again to decrease
the temperature.
Economy symbol
Indicates the programmes and
temperatures that provide energy
savings.
C
Economy symbol can not be selected
in Intensive and Hygiene programmes
since washing is performed in long
times and at high temperatures in
order to provide hygiene. Similarly,
Economy symbol can not be selected
in Baby, Refresh, Drum Cleaning,
Spin and Rinse programmes as well.
Spin speed selection
Whenever a new programme is selected,
the recommended spin speed of the
selected programme is displayed on the
spin speed indicator.
To decrease the spin speed, press
the Spin Speed Adjustment button.
Spin speed decreases gradually.
Then, depending on the model of the
product, "Rinse Hold" and "No Spin"
options appear on the display. See
"Auxiliary function selection" section for
explanations of these options.
C
Rinse Hold option is indicated with “
” symbol and No Spin option is
indicated with “ ” symbol.
F2
F4
F1
F3