Kenwood BL330 - Инструкция (Страница 6)

● Don’t use the blender as a storage
container. Keep it empty before and
after use.
● Never blend more than 1 litre (1 3 ⁄
4
pints) – less for frothy liquids like milk
shakes.
mill only
Use for dry ingredients only.
hints
● When making mayonnaise, put all
the ingredients, except the oil, into
the blender. Then, with the machine
running, pour the oil into the filler cap
and let it run through.
● Thick mixtures, eg pâtés and dips,
may need scraping down. If it’s
difficult to process, add more liquid.
● When crushing ice, add 15ml
(1 tbsp) water to 6 ice cubes.
Operate the blender in short bursts.
to use your mill
1 Put your ingredients into the jar. Fill it
no more than half full.
2 Fit the sealing ring into the blade
unit.
3 Turn the blade unit upside down.
Lower it into the jar, blades down.
4 Screw the blade unit onto the jar
until it’s finger-tight.
5 Place the mill onto the power unit
and turn to lock.
6 Switch on.
7 After milling, you can replace the
blade unit with the sprinkler lid and
shake out your food.
● The sprinkler lid is not airtight.
cleaning
● Always switch off, unplug and
dismantle before cleaning.
● Never let the power unit, cord or
plug get wet.
● Empty the jug before unscrewing it
from the blade unit.
● Don’t wash any parts in your
dishwasher.
power unit
● Wipe with a damp cloth, then dry.
● Push excess cord inside the back of
the machine.
blade unit
1 Remove and wash the sealing ring.
2 Don’t touch the sharp blades –
brush them clean using hot soapy
water, then rinse thoroughly under
the tap. Don’t immerse the blade
unit in water.
3 Leave to dry upside down, away
from children.
other parts
Wash by hand, then dry.
service and customer
care
● If the cord is damaged it must, for
safety reasons, be replaced by
Kenwood or an authorised Kenwood
repairer.
If you need help with:
● using your machine or
● servicing, spare parts or repairs
contact the shop where you bought
your machine.
3