Panasonic KX-FT902RU - Инструкция (Страница 65)

65
11. English Quick Start
11.4 Recording paper
A
Open the cover by pressing the cover open button
(
1).
B
Install the recording paper.
C
Insert the leading edge of the paper into the opening
above the thermal head (
1).
D
Pull the paper out of the unit.
L
Make sure that there is no slack in the paper roll.
E
Close the cover securely by pushing down on both
sides.
F
For KX-FT902:
Press {FAX/START}, then tear off the excess paper
by pulling it towards you.
For KX-FT904/KX-FT908:
Press {FAX/START} to cut the paper.
Correct
Incorrect
1
1
Note:
L If the paper is secured with glue or tape, cut
approximately 15 cm from the beginning of the roll
before installing it.
L
When the power cord is connected, a message is
printed each time the cover is opened then
closed. If the recording paper is installed upside
down, the message will not be printed. Install the
paper correctly.
L
For accessory information, see page 63.
{ FAX/START}
FT-902-904-908RU-ru.book Page 65 Friday, July 2, 2004 9:15 PM