Инструкция по эксплуатации Tefal Optigrill

Страница 10

Advertising

READY

19 -20 When the colour of the cooking level

indicator corresponds to the degree of
cooking you require, open the appliance
and remove the food.

21 Close the appliance. The control panel will light up and set itself to 'choice

of program' mode..
Comment: the security system will turn off automatically if no program
selection is made.

Cooking more food
If you want to cook a second batch of food, please pre-heat the appliance
again (see section 2. Pre-heating, starting from point 9) even if you want to
cook the same type of food.

How to cook another batch of food:
After finishing your first batch of food:
1. Make sure the appliance is closed with no food inside.
2. Select the appropriate cooking mode/program (this step is necessary even

if you decide to pick the same cooking mode than for the previous batch
of food).

3. Press the “OK” button: the appliance starts pre-heating. The pre-heating

is symbolized by the cooking level indicator that flashes purple.

4. The pre-heating is complete when an audible beep is heard and the

cooking level indicator stops flashing purple.

5. After the pre-heating, the appliance is ready for use. Open the grill and

place the food inside the appliance.

Important:
-

Please note that any new batch of food, the pre-heating phase is
mandatory. Remember to always have the grill closed and no food inside
in order for the pre-heating to effectively function.

- Then wait for the pre-heating to be complete before opening the grill and

place the food inside.

N.B.: if the new pre-heating cycle is carried out immediately after the end of
the preceding cycle, the pre-heating time will be reduced.

TEF-OPTIGRILL-EAST-2100088296 17/10/14 15:37 Page10

Advertising