Error displays/messages – Инструкция по эксплуатации Sony CDX-S2050EE

Страница 11

Advertising
background image

11

CDX-S2050EE

2-348-403-31 (1)

H:\Data Disk\2348403311\234840331CDXS2050EEEUR\01GB02CD-EUR.fm

masterpage:Right

H:\Data Disk\2348403311\234840331CDXS2050EEEUR\01GB02CD-EUR.fm

masterpage:Right

Error displays/Messages

If these solutions do not help improve the
situation, consult your nearest Sony dealer.
If you take the unit to be repaired because of CD
playback trouble, bring the disc that was used at
the time the problem began.

The display disappears from/does not
appear in the display window.

• The dimmer is set “DIM-ON” (page 7).
• The display disappears if you press and hold

(OFF).
t Press and hold (OFF) again until the

display appears.

• The connectors are dirty (page 9).

CD playback

The disc cannot be loaded.

• Another disc is already loaded.
• The disc has been forcibly inserted upside

down or in the wrong way.

The disc does not playback.

• Defective or dirty disc.
• The CD-Rs/CD-RWs are not for audio use

(page 9).

The sound skips.

• Installation is not correct.

t Install the unit at an angle of less than 45° in

a sturdy part of the car.

• Defective or dirty disc.

The operation buttons do not function.
The disc will not eject.

Press the RESET button (page 4).

Radio reception

The stations cannot be received.
The sound is hampered by noises.

• Connect a power aerial control lead (blue) or

accessory power supply lead (red) to the power
supply lead of a car’s aerial booster (only when
your car has built-in FM/AM aerial in the rear/
side glass).

• Check the connection of the car aerial.
• The auto aerial will not go up.

t Check the connection of the power aerial

control lead.

• Check the frequency.

Preset tuning is not possible.

• Store the correct frequency in the memory.
• The broadcast signal is too weak.

Automatic tuning is not possible.

• Setting of the local seek mode is not correct.

t Tuning stops too frequently:

Press (SENS) until “LOCAL-ON” appears.

t Tuning does not stop at a station:

Press (SENS) repeatedly until “MONO-
ON” or “MONO-OFF” (FM), or “LOCAL-
OFF” (AM) appears.

• The broadcast signal is too weak.

t Perform manual tuning.

During FM reception, the “ST” indication
flashes.

• Tune in the frequency accurately.
• The broadcast signal is too weak.

t Press (SENS) to set the monaural reception

mode to “MONO-ON.”

An FM programme broadcast in stereo is
heard in monaural.

The unit is in monaural reception mode.
t Press (SENS) until “MONO-OFF” appears.

ERROR

• The disc is dirty or inserted upside down.

t Clean or insert the disc correctly.

• The disc cannot play because of some problem.

t Insert another disc.

FAILURE

The speaker/amplifier connection is incorrect.
t See the supplied installation/connections

manual to check the connection.

L.SEEK +/–

The local seek mode is on during automatic
tuning.

OFFSET

There may be an internal malfunction.
t Check the connection. If the error indication

remains on in the display, consult your
nearest Sony dealer.

RESET

The unit cannot be operated because of some
problem.
t Press the RESET button (page 4).

” or “

During fast-forward or reverse, you have reached
the beginning or the end of the disc and you
cannot go any further.

Advertising