Beko WMD 55100 - Инструкция (Страница 23)

Before calling service
¿i
You turned the machine on, but the leds are off on
the panel.
Check the grounding on the power cable or a blown fuse.
Check the front door proper closure.
Cl
Water coming from beneath the machine.
Check the water intake and drain hoses. Tighten the
connections. The washers of the hoses may be worn out. If
non of the both, the pump filter Is not closed properly.
Machine does not take water.
Check the front door for proper closure. Either taps are
closed or water Intake filters are clogged.
Taken water is directly discharged.
Check if the discharge hose placed as described In the
users manual or not.
Foam coming out of the detergent dispenser.
Check whether your detergent is suitable for automatic
machines. Next time use less detergent.
Pump does not drain water.
Clean the pump filter. Check whether the drain hose Is bent
or not. If there Is need to clean the pump filter, refer to the
pump filter cleaning section of the manual.
Descriptions of the international textile care label (ITCL) symbols
Washing Bleach ci
temperature be used
III
\Ei A A ]i]
No dry cleaning No spin
bleach wash
Can be washed Do not wash
at centrifugal
centrifugal
machine machine
Line dry
© ©
Do not wash Dry clean Chemicals can
be used
Iron permitted Do not iron Warm iron
21