Model: tt2, Introduction, Kit contents – Инструкция по эксплуатации Mongoose TT2
Страница 21: Пользовательское программирование
User’s Guide
Model: TT2
2
Introduction
Thank you for purchasing our Car alarm system.
Mongoose TT2 is a modern car security system, designed and manufactured to ensure the
highest level of security for your car and provide you with a number of convenience features.
Please carefully read this manual and follow its instructions while using different features and
functions of the Mongoose TT2.
We are not responsible for any injuries or damages resulting from your wrong use of our
system.
Do not change the Installer’s Functions while using the alarm system. These functions are
to be adjusted by professional installation staff, and to tailor the alarm system for reliable and
safety operation along with the different equipment installed on your car.
If you find any problems while using the alarm system, contact your installation shop for
repairing or re adjusting. Do not try to repair the alarm system yourself.
After reading this Guide you will be able to make good use of your alarm system and get as full
as possible protection for your car.
The Mongoose TT2 monitors the status of the doors, hood and trunk, two stage shock
sensor and the optional e.g. space disturbance sensor (if installed). A power siren, light
indicators, and a pager system (if installed) will warn you about any intrusion into your
car.
Enhanced anti theft facilities are ensured by a powerful built in blocking relay and an
additional universal output available to connect an extra blocking relay with either
normally closed or normally opened contacts. The Passive Immobiliser function and
programmable disarm authorization procedure are included to enhance the protective
abilities of the alarm system.
Variable functions of the inputs and outputs add flexibility to the installation procedure
and daily usage of the alarm system; optional sensors and other equipment can be
connected. Built in relays are used to connect high current circuits.
The alarm system allows adjustment through programming a number of features to
tailor the system to particular car and extra installed equipment.
The self diagnostics feature helps to identify and quickly remove all possible faults.
Kit Contents
Main Electronic Module
Installation Kit
Sound Speaker
Two Stage Shock Sensor
Remote Control Transmitters
LED
Override Switch
User and Installation Manuals
Автомобильный охранный комплекс “MONGOOSE” Модель TT2.
39
РУССКИЙ
Пользовательское программирование
Функция переключателя
Заводская
Кнопка 1
Кнопка 2
установка
1-1
Автопостановка на охрану
ВЫКЛ.
ВКЛ.
ВЫКЛ.
1-2
Запирание дверей при автопостановке
ВЫКЛ.
ВКЛ.
ВЫКЛ.
1-3
Автоматическая перепостановка на охрану
ВКЛ.
ВКЛ.
ВЫКЛ.
1-4
Запирание дверей при включении зажигания
ВКЛ.
ВКЛ.
ВЫКЛ.
1-5
Звуковые сигналы подтверждения выполнения команд
ВКЛ.
ВКЛ.
ВЫКЛ.
1-6
Режим пассивного иммобилайзера
ВЫКЛ.
ВКЛ.
ВЫКЛ.
1-7
Активизация Anti Hi-jack при открытии двери
Дистанционно
Автоматическая
Дистанционно
включаемая
активация при
включаемая
активация
каждом
активация
открытии двери
1-8
Изменение PIN кода 1
÷9 (только кнопка 2).
Изменение PIN кода 11
÷99 (кнопка 1+кнопка 2)
1
Нажать требуемое
Нажать требуемое
число раз для
число раз для
ввода десятков
ввода единиц
2-1
Стирание кодов всех пультов кроме используемого
-
Нажать кнопки 1&2 вместе
2-2
Возврат к заводским установкам пользовательских функций
-
Нажать кнопки 1&2 вместе
2-3
Кнопка (кнопки) отключения пассивного иммобилайзера.
Кнопка 1
(
DAPS
TM
)
Для входа в режим программирования одновременно нажать
кнопки 1 и 2. По окончании установки нажать кнопки 1 и 2
еще раз для выхода из режима.
2-4
Включение тревоги при не отключении пассивного
ВЫКЛ.
Для выбора
ВЫКЛ.
иммобилайзера после снятия с охраны (
ASL
TM
).
длительности
задержки
включения
Светодиодная индикация:
тревоги нажать:
15 секунд – одиночные вспышки
1 раз – 15 сек
30 секунд – двойные вспышки
2 раза – 30 сек
60 секунд – тройные вспышки
3 раза – 60 сек
2-5
Задержка включения тревоги при открытии двери
ВЫКЛ.
Для выбора
ВЫКЛ.
длительности
задержки
включения
Светодиодная индикация:
тревоги нажать:
15 секунд – одиночные вспышки
1 раз – 15 сек
30 секунд – двойные вспышки
2 раза – 30 сек
2-6
Переход к установочному программированию
Нажать кнопки 1&2 вместе
Нажать кнопки в выбранной
последовательности: 1; 2; 3
1
⇒ 1; 1 ⇒ 2; 1 ⇒ 3; 2 ⇒ 1;
2
⇒ 2; 2 ⇒ 3; 3 ⇒ 1; 3 ⇒ 2;
3
⇒ 3