Installation, Installing on a firm and flat surface, Keep an appropriate distance between the wall – Инструкция по эксплуатации LG GC-379BV
Страница 5: Installing in a less humid environment, Avoid installing near heat and gas
Внимание! Текст в этом документе был распознан автоматически. Для просмотра оригинальной страницы Вы можете воспользоваться режимом "Оригинал".
INSTALLATION
Installing on a firm and flat surface
- Unstable installation is the main reason
of vibration and noise.
- When the refrigerator is installed unstably,
it can be stabilized by adjusting the
adjustable foot.
- Slightly rising the front part of the
refrigerator allow you to close the door
very easily.
- When installed on a carpet or floor,please put
a firm mat under the refrigerator otherwise
the bottom part will change colour.
Keep an appropriate distance between
the wall
- To ensure proper air circulation around the fndge
-freezer,please maintain sufficient space on both the
sides as well as top and maintain at least 2 inches
(5 cm) from the rear wall.
- A smaller gap will restrict the operation of the
refiigerator,which may result in an increase in
power.
Installing in a less humid environment
- Do not install the refrigerator in a humid place
or where water can easily be splashed.
- If the refrigerator is installed in a humid
environment,it will go moldy. This will lower
insulation property and cause electricity leakage
Avoid installing near heat and gas
- High temperature will lower the refrigeration
and increase the power consumption.
- Installing near gas or smoke will change the
surface colour of the refrigerator.