Dust indicator, Dust bag removal(dust cover), Suction power control (remote control model only) – Инструкция по эксплуатации Samsung VC-6025V

Страница 5

Внимание! Текст в этом документе был распознан автоматически. Для просмотра оригинальной страницы Вы можете воспользоваться режимом "Оригинал".

Advertising
background image

SUCTION POWER CONTROL (REMOTE CONTROL MODEL ONLY)

Your cleaner has variable electronic suction control to give you greater versatility.

Select the most suitable position according to cleaning needs.

The suction capacity can be regulated Steplessly by moving the slide to the desired

position

mm

JA JUHTNUPUD ( AINULT KAUGJUHTMISEGA VOIMSUSE REGULEERIMISE MUDEUTEL}

imamisvoimsust Saab uhtlaselt reguieerida, lOkates regulaator soovitud asendile.

WAX

I

SLIDE THE PART “A" IN THE STOP POSITION

Vacuum cleaner switches off (stand by mode)

SLIDE THE PART “A" TOWARDS MAX

Suction capacity increases steplessly up to MAX.

DUST INDICATOR

You may continue cleaning until the dust indicator changes and displays a red colour. This
means the dust bag is full and needs to be replaced.

If the indicator suddenly displays red and the cleaner loses suction power while in use, turn

your cleaner off and check whether the hose, pipe or nozzle is clogged.
When you check bag status by indicator, set motor power on maximum position.

DUST BAG REMOVAL(DUST COVER)

E : Hose must be disconnected before changing bag,

Replace the dust bag as soon as it is full.

1. To open the dust cover of the dust bag

compartment, lift the cover upward.
2. Remove the dust bag from the cleaner.
3. Dispose of the full bag. Insert the

cardboard bag oollar of the dust bag as

tar as

It

can go on the suction inlet along

the slide guide. Press down the locker.
Position the dust bag so that no part of

the bag is pinched.

4. Press the front of dust cover down lightly
until it re-locks.

LOCKER

Advertising
Эта инструкция подходит к следующим моделям: