Dell KVM 2161DS - Инструкция (Страница 42)

42 Analog Port Operation
w
w
w
.d
el
l.
c
o
m
|
s
upp
ort
.del
l.
com
To password protect your console:
1
Set your password as described in the previous procedure.
2
Select Enable Screen Saver.
3
Type the number of minutes for Inactivity Time (from 1 to 99) to delay activation of password
protection and the screen saver feature.
4
For Mode, select Energy if your monitor is ENERGY STAR™ compliant; otherwise select
Screen.
CAUTION: Monitor damage can result from the use of Energy mode with monitors not compliant with
ENERGY STAR™.
5
(Optional) Click Test to activate the screen saver test which lasts 10 seconds then returns you
to the Security dialog box.
6
Click OK.
To log in to your console:
1
Press <Print Screen> to launch OSCAR. The Password dialog box appears.
2
Type your password and then click OK.
3
The Main dialog box appears if the password was entered properly.
To automatically log out of a server when inactive:
1
In the Main dialog box, click Setup - Security. If you have password protection, the Password
dialog box appears.
2
Type your password, and then click OK. The Security dialog box appears.
3
In the Inactivity Time text box, enter the length of time you want to stay connected to a
server before it automatically disengages you.
4
Click OK.
To remove password protection from your console:
1
In the Main dialog box, click Setup - Security. the Password dialog box appears.
2
Type your password, and then click OK.
3
In the Security dialog box, single-click and press <Enter> or double-click in the New box.
Leave the box blank. Press <Enter>.
4
Single-click and press <Enter> or double-click in the Repeat box. Leave the box blank. Press
<Enter>.
5
Click OK if you only want to eliminate your password.
To enable the screen saver mode with no password protection: