Vitek VT-3470 GY - Инструкция (Страница 6)

POWER ON/OFF
1. Connect the power cable to the AC input socket (28) at
the unit and then insert the power plug in the wall socket.
Slide the FUNCTION selector (3) to your desired mode
(CD, TAPE or RADIO with Play button pressed).
2. To turn off the power, slide the FUNCTION selector (3) to
TAPE (OFF) position.
BASIC OPERATION
Volume Control
Once the required station has been located or during
tape/CD playback, adjust VOLUME control (1) to the desired
level.
LISTENING TO THE RADIO
1. Select the FUNCTION selector (3) to RADIO mode.
2. Select the BAND selector (9) to AM or FM or FM ST.
band.
3. Tune the TUNING control (10) to the desired station.
4. When finished listening, slide the FUNCTION selector (3)
to TAPE (OFF) position.
PLAYING COMPACT DISCS
1. Select the FUNCTION selector (3) to CD mode.
2. If there is no CD inside or disc damaged, the LCD will
show "no".
Loading a disc
1. Press the CD door open button (7) to open the CD door.
2. Put a disc inside and then close the CD door. The unit
begins to read the disc. After that, the disc is playing
automatically.
Note:
Ensure the disc is pushed fully and locked in place.
This unit is CD R / RW compatible.
To play the disc
In CD stop mode, press PLAY/PAUSE button (18) to play
the CD.
To pause the playing
Press PLAY/PAUSE button during the disc is playing, the
playing time will flash. Press it again to resume playing.
To stop the disc playing
Press the STOP button (19).
Skip and Search Function
Press the SKIP NEXT or BACK button (22/23) momentarily.
In play mode In stop mode
Press once Press twice Press once
Back to the Previous track Previous track
begining of
the current
track
Next track Next track
Press and hold the SKIP button during playback:
: FAST BACKWARD : FAST FORWARD
NOTE : During search mode low level audio will be heard to
assist in locating the correct point in the track.
PROGRAMMED PLAYBACK
The CD player enables you to program up to 20 tracks in a
sequence of your choice. First select CD stop mode.
1. Press the PROG. button (15) one time. ("PROGRAM"
flashes)
2. Press the SKIP NEXT or BBACK button (23) to select the
desired track to be programmed.
3. Press the PROG. button (15) again, then the selected
track, e.g., track 4 is stored.
4. Continue to program, repeat steps 2 and 3 for each
selection.
Reviewing programs
Press the PROG. button (15) repeatedly. The track number
programmed on each program number will be displayed.
5. Pressing PLAY/PAUSE button (18) to play the program
tracks.
Clear the program
Press the PROG. button (12) to recall previously pro
grammed track ("PROGRAM" icon blinking), then press CD
stop button will cancel the preset programs or change func
tion mode or open the CD door.
PLAYING MP3 DISCS
1. Set the FUNCTION selector (3) to CD mode.
2. If there is no disc inside or disc damaged, the LCD will
show "no".
Loading a disc
1. Press the CD door open button (7) to open the CD door.
2. Put a disc inside and then close the CD door. The unit
begins to read the disc. After that, the disc is playing
automatically.
Note:
Ensure the disc is pushed fully and locked in place.
This unit is CD R / RW compatible.
ENGLISH
6
3473.qxd 27.06.2005 12:14 Page 6