Vitek VT-3950 GY - Инструкция (Страница 4)

ENGLISH

the unit. Technical maintenance must be per-
formed only by qualified service personnel.
Install the unit in places with proper ventilation.
The product should be situated away from
heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers)
that produce heat. Do not expose the unit to
direct sunlight, excessive dust or mechanical
shocks.
Be especially careful if children or infirm per-
sons are near the operating appliance. Do not
leave them unattended.
Provide that no foreign objects get into open-
ings of the unit; it can lead to fire or electric
shock. If it happens unplug the unit and apply to
the service centre.
Conditions Requiring Service
Unplug this unit from the wall outlet and refer
servicing to qualified service personnel under
the following conditions:
a) When the power supply cord or plug is
damaged.
b) There are foreign objects inside the unit.
c) If the unit has been exposed to rain or water.
d) If the unit does not operate normally by
following the operating instructions.
e) If the unit has been dropped or its cabinet
has been damaged.
f) When the unit exhibits a distinct change
in performance - this indicates a need for
service.
Cleaning
Unplug this unit from the wall outlet before
cleaning. Use a damp cloth for cleaning. Wipe
the front panel with a damp soft cloth dampened
in soapy water. Do not use liquid cleaners or
aerosol cleaners.
Cleaning discs
Do not use cracked or deformed discs, it can
damage a unit.
Hold the disc by the edges. Do not touch the
surface. Dust, scratches or fingerprints on the
surface may lead to a failure of the unit.
Protect the disc from direct sunlight; keep them
away from heat sources, high temperature and
moisture.
After usage, put the discs in the case for stor-
age.
Wipe periodically the surface of the discs with a
soft cloth from the center to the edges. Do not
use detergents.
DESCRIPTION
. The PHONES jack for connecting the
earphones
2. The PROGRAM button for programming and
viewing the programmed tracks
. The REP/RAN (repeat/random playback)
button
. The STOP/SD button
(stop playback of CD, MP, USB, SD/MMC,
cancel programming of СD, press and hold
this button for more than ,5 seconds to
change a media device USB ./SD (MMC))
5. Disc slot
6. The OPEN/CLOSE button
7. The PLAY/PAUSE/USB button (playback/
stop playback of CD/MP/USB/SD/MMC,
press and hold this button for more than
,5 seconds to change a media device CD/
USB)
8 . The BACK button – return to the previous
track (press and hold this button for more
than , 5 seconds to fast rewind)
9. FM –antenna
0. The NEXT button – move to the next track
(press and hold this button for more than ,
5 seconds to fast forward)
. operating mode switch (RADIO, OFF, MP/
CD)
2. Volume control – VOLUME+
. Speaker
. MMC/SD jack
5. LCD-display (reflects FM / AM frequency
and the current state of the unit)
6. Remote control sensor
7. USB-jack
8. The TUNING knob
9. Range switch (FM. ST/FM/AM)
20. Battery compartment lid
2. Power supply jack
22. FM ST Stereo mode indicator
2. Handle for carrying
Remote control
2. The PROGRAM button
25. The track/folder button: -0/FOL- +0/FOL+
26. The PLAY/PAUSE (
►║) / USB button
27. The BACK track button / fast rewind /
ENGLISH
3950IM.indd 4 19.05.2008 14:58:32